Victor Precision Lathes 1600B - 1600BVS - 618EM - 618EVS

Stocking Distributor for Victor Precision Lathes
Precision Gap Bed Lathes of the Highest Quality

1600B - 1600BVS - 618EM - 618EVS
1630B - 1640B - 1660B

Victor Precision Lathes 1600B - 1600BVS - 618EM - 618EVS

Victor 1600B Lathe

Victor 1600B Series Features

  • One shot lube system for apron and slide way

  • Spindle is supported at 3 points by precision bearings

  • Hardened and ground bed ways

  • Hardened and precision ground gears in headstock

  • 2-1/32” Spindle bore with D1-6 Camlock spindle nose

  • Inch / Metric dual dial

  • Inch / Metric threading without changing gear

  • Full length foot break

  • Range of spindle speeds 33 – 2000 rpm

  • Rigid one piece cast iron base
Victor 1600 BVS Lathe
Victor 1600BVS Series Features

  • Range of spindle speeds - Low 40 - 480 rpm High 240 - 2300 rpm

  • Equipped with spindle speed indicator and load meter

  • 3 points bearings supported by 2 tapered rollers and 1 ball bearing

  • Hardened and ground bed ways

  • Hardened and precision ground gears in headstock

  • 2-1/32” Spindle bore with D1-6 Camlock spindle nose

  • One shot lube system for apron and carriage

  • 7 1/2 hp inverter

  • One piece cast iron stand with foot break

  • Inch / Metric dual dial

  • Universal without change gear
Inverter driven, Less vibration, Less noise & easy operation


victor lathes 1630B, 1640B, 1660B specifications

* Specifications are subject to change without notice for further design improvements

  Victor 618EM & 618 EVS Lathes
 

Victor 1618EM Lathe

  

Victor 618EM Features

Precision angular contact ball bearings.

Inch/Metric quick change gear box.

Hardened and precision ground bead ways.

Turcite B bearings surfaced between
carriage and bed.

Independent variable speed while cutting.

Thread length control stops with fine
adjustment.

Spindle run out within 50 millionths.

5C collect closer standard

 
Victor 618 EVS high speed lathe with electronic variable speed

  

Victor 618EVS Features

Precision angular contact ball bearings.

Inch/Metric quick change gear box.

5 HP Main Motor

Bodine Electric DC motor for cartridge feed

0 - 4000 rpm spindle speed (5C collet)

Hardened and precision ground bead ways.

Turcite B bearings surfaced between carriage and bed.

Independent variable speed while cutting.

Thread length control stops with fine adjustment.

Spindle run out within 50 millionths.

5C collect closer standard
 

 call_us.gif (4049 bytes)

home | new machinery | used machinery | machinery appraisals | directions | e-mail

Victor Lathes | Victor Mills | Acer Grinders | Longem Lathes Repair Parts | Uni-Hydro | Gallop Lathes

this website was built by GMAD



Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.