| Cincinnati
0-8 / 12 Automatic Milling Machines Sales
& Service |
 Plain Automatic Mill |
 Mill with Rise & Fall Spindle |
| Table | ||
| Working surface Size overall T-slots (number & Size) Distance between T-slots |
6 1/2" x 23 11/16" 11 1/8" x 32 7/16" 3 9/16" wide 2" |
6 1/2" x 23 11/16" 11 1/8" x 32 7/16" 3 9/16" wide 2" |
| Range | ||
| Longitudinal (Power table travel) Vertical movement of spindle carrier hand. Power vertical movement of spindle carrier. Center of spindle to top of table. Distance from center line of table to face of spindle carrier. |
8" 6" ----- Max 7 1/2" Min 1 1/2" 5 1/4" |
8" 4 1/2" 2 1/2" Max. 8 1/2" Min. 1 1/2" 5 1/4" |
| Full Width | ||
| Max. distance from spindle nose to spindle
carrier face. Max. distance from spindle carrier face to inside of arbor support. |
9 3/4"
|
9 3/4"
|
| Quill | ||
| Adjustment, hand traverse Diameter distance from spindle nose to centerline of table. Max. distance from spindle nose to spindle carrier face. |
1" 4 1/4" Max. 4 3/8" 7/8" |
1" 4 1/4" Max. 4 3/8" 7/8" |
| Overarm | ||
| Distance from underside to centerline of spindle. | 5 1/4" | 5 1/4" |
| Spindle | ||
| Spindle nose Hole for draw-in bolt. Speeds
|
No. 40 Std. 11/16" Number 20 Hand |
No. 40 Std. 11/16" Number 20 Automatic Hydraulic |
| Feeds | ||
| Table} Number (feed rates selected with pick off gears) Range (Standard Series) Range (Optional Series A) Range (Optional Series B) Spindle carrier down only |
16 1/2" to 20" / Min. 1" to 40" / Min. 2" to 80" / Min. ----- |
16 1/2" to 20" / Min. 1" to 40" / Min. 2" to 80" / Min. 1" to 10" / Min. |
| Power Rapid Traverse | ||
| To table - longitudinal To Spindle carrier - vertical |
400" / Min. ----- |
400" / Min. 80" / min. |
| Drive | ||
| Spindle motor Feed motor |
1 1/2 hp 1 hp |
1 1/2 hp 1 hp |
| Shipping Data (Weights are Approximate) | ||
| Net weight Gross weight, domestic |
1800 Lbs. 1950 Lbs. 2400 Lbs. 50" x 66" x 44" 84 cu. ft. |
2200 Lbs. 2350 Lbs. 2800 Lbs. 50" x 74" x 44" 94 cu. ft |
|
home | new machinery | used machinery | machinery appraisals | directions | e-mail Victor Lathes | Victor Mills | Acer Grinders | Longem Lathes Repair Parts | Uni-Hydro | Gallop Lathes |
||
